|
$15 |
Built and tested (please allow 2-3weeks delivery time) |
This timer is very
flexible. The supply voltage needed is between 2.5V and 5.5V making it perfect for many
applications. The timer has many trigger options: breakwire, makewire or G switch. The output can handle over 4amps to fire an ematch or with the pull up
resistor it will drive a servo. The servo position can be adjusted with software to any of 10 positions in
the travel of the servo. Check out the manual in the downloads section for more info. Please specify the interval you would like when ordering or if you will need
to change it get the optional configuration cable.
And
it has the option to detect motor burnout.
Great for that camera project you have been
planning.
You can even set two different trigger rates for the timer, and the
total number of times it will trigger.
This comes in handy when you want to
use a 36 exposure role of film yet only take 12 shots per flight.
And with
the two trigger rates you can take fast succession pictures on the way up, then
slow it down for the descent.
Accessories:
| Configuration cable | $15 |